What is a low cement castable? Low cement refractory castable refers to the refractory castable combined with calcium aluminate cement, the content of CaO is less than 2.5%, that is, the amount of cal...
What is an alkali resistant castable? Castable refractories that can resist the erosion of alkali metal oxides (such as K2O and Na2O) at medium and high temperatures are called alkali resistant refrac...
What are the main raw materials used in alkali resistant castables? The aggregates used in light alkali-resistant refractory castables include alkali resistant ceramsite, porous clinker, waste porcela...
What is a hot blast stove? The hot blast stove is a device that provides hot blast for the blast furnace. It is a regenerative heat exchanger, which is used to preheat the blast furnace hot blast and ...
What are the commonly used wear resistant castables for cement rotary kilns? What are their main functions? The wear resistant castable mainly refers to the castable with good wear resistance at room ...
How to choose refractory materials for cement rotary kiln? Cement rotary kiln is the most advanced rotary kiln on the market. After years of technological innovation, breakthroughs have been made in t...
What are the commonly used wear resistant castables for cement rotary kilns? What are their main functions? Wear resistant castables mainly refer to castables with good wear resistance at room ...
How do you use refractory castable cement? 1. Refractory castables for pouring construction should be selected according to local conditions. Different structural parts have different pouring m...
How to produce castables? As a refractory material, castable should be produced according to the corresponding process. If there is a larger material, it should be coarsely crushed first, then finely ...
what high alumina bricks are used in the rotary kiln? The compressive strength of high alumina bricks for rotary kiln is divided into normal temperature compressive strength and high temperature compr...
Castables are the main type of monolithic refractories. Depending on the adhesive used, the cure formation mechanism can be divided into three types: hydraulic, air-hard, and hard. It is also the most...
IPv6 network supported
español
العربية
