What is a low cement castable? Low cement refractory castable refers to the refractory castable combined with calcium aluminate cement, the content of CaO is less than 2.5%, that is, the amount of cal...
How much do class kilns cost? What are the refractory materials for glass melting furnaces? Shaped refractories: silica bricks, clay bricks, kaolin bricks, high alumina bricks, sillimanite bricks...
What are the main raw materials used in alkali resistant castables? The aggregates used in light alkali-resistant refractory castables include alkali resistant ceramsite, porous clinker, waste porcela...
What is a hot blast stove? The hot blast stove is a device that provides hot blast for the blast furnace. It is a regenerative heat exchanger, which is used to preheat the blast furnace hot blast and ...
What is tap hole clay? The tap hole is a very important part of the blast furnace, and it is the channel for discharging molten iron and slag from the blast furnace. Due to the large-scale blast furna...
What are the commonly used wear resistant castables for cement rotary kilns? What are their main functions? The wear resistant castable mainly refers to the castable with good wear resistance at room ...
What are the commonly used wear resistant castables for cement rotary kilns? What are their main functions? Wear resistant castables mainly refer to castables with good wear resistance at room ...
what is an internal combustion hot blast stove? Internal combustion hot blast stove, a traditional equipment for heating blast. The internal combustion hot blast stove is an internal combustion hot bl...
Castable, also known as refractory castable, is the most common refractory material in unshaped refractory materials. It needs to be poured for construction, so it is called refractories castab...
How do you use refractory castable cement? 1. Refractory castables for pouring construction should be selected according to local conditions. Different structural parts have different pouring m...
How to produce castables? As a refractory material, castable should be produced according to the corresponding process. If there is a larger material, it should be coarsely crushed first, then finely ...
Castables are the main type of monolithic refractories. Depending on the adhesive used, the cure formation mechanism can be divided into three types: hydraulic, air-hard, and hard. It is also the most...
IPv6 network supported
español
العربية
