The alumina ball is also called the high aluminum accumulation of heat ball.High alumina refractory ball is based on bauxite as the mainly raw refractory material.Adding powder and additives and anchoring agent.After proportioning, molding and high sintering to make it.The production engineering of high alumina refractory ball is similar to that of high alumina refractory brick.It should be based on the properties of raw materials,high alumina refractory ball requires production conditions and other factors to determine.
40-75% refractory alumina ball for hot blast stove
The alumina ball is also called the high aluminum accumulation of heat ball.High alumina refractory ball is based on bauxite as the mainly raw refractory material.Adding powder and additives and anchoring agent.After proportioning, molding and high sintering to make it.The production engineering of high alumina refractory ball is similar to that of high alumina refractory brick.It should be based on the properties of raw materials,high alumina refractory ball requires production conditions and other factors to determine.
The function of high aluminum refractory ball:it mainly stacked in industrial kilns, which can achieve the effect of accumulation of heat.
The application of high aluminum refractory ball : it can be used in the blast furnace ironmaking of Cowper blast air heater, high and low temperature conversion furnace in chemical fertilizer plant, conversion furnace, hydrogenation converter, desulphurization trough and methane furnace.Reformer, hydrogenated converter and desulphurizing tank.,Methane furnace.
High aluminum refractory ball index
|
Item |
High alumina |
Low creep |
Mullite |
Corundum |
|
Size(mm) |
40-80 |
40-80 |
40-80 |
40-80 |
|
AL2O3(%) |
65 |
70 |
75 |
95 |
|
Refractoriness under load(°C) |
1450 |
1460 |
1530 |
1650 |
|
Apparent Porosity(%) |
25 |
23 |
22 |
18 |
|
Bulk Density(g/cm3) |
2.3 |
2.4 |
2.5 |
3.1 |
|
Cold crushing strength(Mpa) |
13 |
14 |
32 |
36 |
|
Thermal shock resistance (1100°Cwater cooling) cycle ≥ |
15 |
10 |
20 |
7 |
|
Refractoriness(°C) |
1710 |
1750 |
1800 |
1800 |
(1)The heat storage capacity is strong and the heat storage effect is good
(2)The creep properties is good.
(3)High compression strength and good abrasive resistance.
(4)The chemical stability is good.
(5)Good resistance to elevated temperatures.
Brown Fused Alumia powders are fused wIth premium raw materials and 3500 KVA furnace. It is perfect material specifically manufactured to be used for general abrasive applications in bonded abrasive tools, polishing and sandblasting grit. It has lower hardness and abrasive capacity than diamond, boron carbide, and silicon carbide, it is widely used for grinding ferrous materials, finishing tough and hard materials. It is also be used as high-class refractory materials. Brown Fused Alumia is offered in macro and micro powder form, in both F and P grades.
Silica brick: an acidic refractory mainly composed of tridymite, cristobalite and a small amount of residual quartz and glass phases. Its silica content is more than 94%, it has anti-acid slag erosion performance, high high temperature strength, high load softening temperature, long-term use in high temperature flower wells without deformation, but low thermal shock stability (heat exchange in water is 1-4 Second-rate).
The refractory ramming material is prepared from a high proportion of granular and powdery materials and a very low proportion of binders and other components, even all of which are composed of granules and powders, and are subject to strong ramming. Bulk materials for construction.
The refractoriness of clay bricks is comparable to that of silica bricks, up to 1690~1730℃, but the softening temperature under load is more than 200℃ lower than that of silica bricks. Because in addition to the high refractory mullite crystal, the clay brick also contains nearly half of the low melting point amorphous glass phase.
Corundum bricks are mainly used in iron-making blast furnaces and blast furnace hot blast furnaces, refining furnaces outside steel-making furnaces, sliding water heaters, glass melting furnaces and petrochemical industrial furnaces, etc.
High alumina brick is one of the indispensable basic refractory materials in the upper and middle parts of blast furnace body in iron and steel industry
Refractory castable is a kind of refractory material that does not need to be formed and has good fluidity after being fired and stirred with water.
The heavy parts of the chrome-zirconium mullite composite bricks are made of high-purity sintered mullite, high-purity chromium oxide, high-purity zirconia, and Guangbai mud as the main raw materials, and the light part of the raw materials are made of 47 mullite, kyanite, Bleaching beads, coke gemstones and Guangxi white mud are the main raw materials
IPv6 network supported
español
العربية
